SOLLAU s.r.o.

MAGNETS AND
MAGNETIC FILTERS

Magnets and magnetic filters / separators

Welcome to the www.magnet-technology.com website and eshop.

We offer a wide range of products with a special focus on:

Magnets

Our product range includes a wide array of magnets – from ferrite, through neodymium up to rubber coated ones.

Sollau_magnets-(10)web.jpgThe strongest magnets are neodymium NdFeB magnets; these are made by sintering rare earth elements (neodymium-iron-boron) in vacuum and are among the most technologically advanced products on the market. These super strong magnets led to a revolution in modern technology and fundamentally affected the range of applications of magnets (after all, a neodymium magnet is capable of carrying loads of up to thousand times its own weight).

The industrial applications of neodymium magnets are very wide, ranging from furniture fittings up to buckling of purses. Neodymium magnets became absolutely indispensable in the area of metal detectors (industrial, flow-through, conveyor-belt etc.), and it is also hard to imagine what waste sorting and processing would look like without these super strong magnets. They also offer an extraordinarily efficient means of handling heavy loads.

Available products: Neodymium NdFeB magnets,, Ferrite magnets, AlNiCo magnets, SmCO magnets, Rubber coated magnets, Office magnets

 

Pot magnets

Pot magnets are magnets which are seated in a steel case.

Sollau_cocky_web.jpgThe specially shaped magnetic field focuses magnetic force onto a single side of the pot magnet.

Pot magnets use the magnetic force to attach to steel surfaces. The ineffective side of the pot magnet then usually contains various mounting elements (external or internal thread, hook, peg etc.).

 

Available products: Ferrite pot magnets, Neodymium pot magnets, SmCo pot magnets, AlNiCo pot magnets, Neodymium cylindrical pot magnets, AlNiCo cylindrical pot magnets, SmCo cylindrical pot magnets

 

Magnetic sheets and magnetic strips

Permanent magnetic sheets are produced from a mixture of a highly magnetic powder and polyethylene. The resulting product has a wide range of applications, perhaps the most prominent one being advertising.

folie_samolepici_3M_sollauTo achieve the desired appearance, it is possible to print on the external side.

Magnetic sheets can easily be cut by hand, but the required shapes can also be produced by machine cutting or machining.

We supply magnetic sheets of various thickness (0.4 to 1.4 mm), colours (natural, white, blue, green, red yellow), sizes (in rolls or cut to A5, A4 or A3), in standard or self-adhesive versions.

 

http://www.magnet-technology.com/content/493-sMagnetic strips are produced from a mixture of a highly magnetic powder and polyethylene. The resulting product has a wide range of applications, perhaps the most prominent one being advertising.

Magnetic strips can easily be cut by hand, but the required shapes can also be produced by machine cutting or machining.

 

Available types of sheets: Magnetic sheets - natural, Magnetic sheets - white, Magnetic sheets - colour, Magnetic sheets - self-adhesive neodymium with 3M, Magnetic sheets - self-adhesive layerMagnetic paper

Available types of strips: Self-adhesive magnetic strips, Colour magnetic strips

 

Magnetic pockets

Magnetic pockets can be attached for instance to shelves, machines, various metal parts and products.

http://www.magnet-technology.com/content/890-sIn complex production lines, magnetic pockets can be used as a mobile information carrier about a specific product for the whole duration of the given technological process. This is advantageous as information placed in the pocket can be easily and quickly replaced, etc.

There also exists a self-adhesive variant of the magnetic pocket, where only the frame holding the outer transparent part of the packet is magnetic. The self-adhesive layer allows this type of pocket to be glued to all kinds of surfaces (even non-magnetic ones), allowing wider usage of the product.

Available products: Magnetic pockets in the following formats: A6, A5, A4, A3, and business-card

 

Magnetic separators for receiver hoppers of injection moulders and other magnetic products

Magnetic separators for receiver hoppers of injection moulders are used to separate ferromagnetic particles from a flow of freely falling material (regranulate, plastic grit etc.).

http://www.magnet-technology.com/content/423-sThe separator prevents damage to injection moulders with a classic cone-shaped hopper (prevents the entry of metal particles into the screw and nozzle mechanisms).

Magnetic separators for receiver hoppers of injection moulders are equipped with very strong NdFeB neodymium magnets, allowing the interception of even the finest powder particles of metals. Additionally, the use of neodymium magnets prevents the carry-off of intercepted particles by the flowing material (unlike various competing separators equipped only with ferrite magnets).

Other magnetic products with industrial applications in various fields: Magnets for plastic industry, Magnets for metallurgy and machine works, Magnets for scrap processing, Magnets for technological baths, Office and household products

 

We are looking for

Sales representatives or distributors

We are looking for Sales representatives or distributors
for local markets. Details ->

zastupce.jpg

Innovative and tailor-made magnetic separators

Follow up web site focused on sollau magnetic separators and other tailor-made products ...

www.sollau.com

Subscribe to our newsletter
You will be informed about all current events, special offers and discounts. You can unsubscribe at any time.

PayPal payments

PayPal

we accept payments via PayPal

Head office

SOLLAU s.r.o.
Hrivinuv Ujezd 212
763 07 Velky Orechov

the Czech Republic

ID: 29261759
Tax ID: CZ29261759

Contact us

Phone: +420 577 013 873
Handy: +420 776 266 084

info@magnet-technology.cz